>NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >Name >Value CAPACITOR chip >NAME >VALUE >Name >Value >Name >Value >Value >Name >Value >Value >Name Released under the Creative Commons Attribution Share-Alike 3.0 License http://creativecommons.org/licenses/by-sa/3.0 Designed by: >NAME >VALUE >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE LED 3 mm, round >NAME >VALUE LED 5 mm, round >NAME >VALUE 32M1-A Micro Lead Frame package (MLF) >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package G >NAME >VALUE RESISTOR chip >NAME >VALUE parkfun.com Small Shrink Outline Package >NAME >VALUE Stand Off This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. SKU : PRT-00447 Thin Plasic Quad Flat Package Grid 0.8 mm >NAME >VALUE USB Series A Hole Mounted >NAME PCB Edge >Name >Value USB Series A Surface Mounted >NAME USB Series B Hole Mounted >NAME >VALUE USB Series B Hole Mounted >NAME >VALUE USB Series B Surface Mounted >NAME USB Series Mini-B Hole Mounted >NAME USB Series Mini-B Surface Mounted >NAME >VALUE USB Series Mini-B Surface Mounted >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE MOSI RESET SCK MISO +5 GND >NAME >VALUE >NAME >VALUE Released under the Creative Commons Attribution Share-Alike 3.0 License http://creativecommons.org/licenses/by-sa/3.0 Design by: Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: Document Number: >DRAWING_NAME >NAME >VALUE >VALUE >NAME >VALUE SFE >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE USB >VALUE SUPPLY SYMBOL AVR ISP 6 Pin This is the reduced ISP connector for AVR programming. Common on Arduino. This footprint will take up less PCB space and can be used with a 10-pin to 6-pin adapter such as SKU: BOB-08508 Capacitor Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. Capacitor Polarized These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in electrolytic and tantalum varieties. Always verify the external diameter of the through hole cap, it varies with capacity, voltage, and manufacturer. The EIA devices should be standard. Fiducial Alignment Points Various fiducial points for machine vision alignment. Schematic Frame Standard 8.5x11 US Letter frame USB UART This is the simplified version of the FT232RL unit. Only what you need, nothing you don't. Spark Fun Electronics SKU : COM-00650 SUPPLY SYMBOL LEDs Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others) Spark Fun Electronics PCB Logo This is the standard Spark Fun Electronics PCB logo. Header 7 Standard 7-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... This footprint was designed to help hold the alignment of a through-hole component (i.e. 7-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is usually a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the header in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. Header 8 Standard 8-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Resistor Basic schematic elements and footprints for 0603, 1206, and PTH 1/10th watt (small) resistors. Stand Off This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. SKU : PRT-00447 USB Connectors USB-B-PTH is fully proven SKU : PRT-00139 USB-miniB is fully proven SKU : PRT-00587 USB-A-PCB is untested. USB-A-H is throughly reviewed, but untested. Spark Fun Electronics SKU : PRT-00437 USB-B-SMT is throughly reviewed, but untested. Needs silkscreen touching up. USB-A-S has not been used/tested USB-MB-H has not been used/tested SUPPLY SYMBOL